HANDPIECE REPAIR SERVICE

Application for Service

Company *
 
Contact person *
 
E-mail *
 
Phone *
 
Address
Your message or question  *
 

We fix your handpiece so it is like new!

Our repair technicians will bring your handpiece back to life by repairing your handpiece strictly to manufacture technical specifications. After a pre-repair inspection every handpiece is disassembled fully and cleaned to remove any debris. In the next step new parts are installed and then the handpieces are reassembled carefully using quality tooling and lubricants. Once handpieces are reassembled, they undergo a full test to inspect function and operation. In the final step your handpiece is cleaned and polished to look like new, and then packed ready for sterilization.

High Speed Handpieces from 99,00 EUR and up

Bearings Replacement EUR 99,00

Replacement of bearings, o-rings and seals; Concentricity check; Cleaning interior; Cleaning of air and water lines; Cleaning and polishing of external shell; Head reaming if necessary; Bur removal if necessary; Replacement of end gasket; Testing using OEM standards; 3 months warranty

Rotor replacement EUR 199,00

Replacement of rotor, o-rings and seals; Concentricity check; Cleaning interior; Cleaning of air and water lines; Cleaning and polishing of external shell; Head reaming if necessary; Bur removal if necessary; Replacement of end gasket; Testing using OEM standards; 12 months warranty

Rotor and Back Cap Replacement EUR 230,00

Replacement of rotor, back-cap, o-rings and seals; Concentricity check; Cleaning interior; Cleaning of air and water lines; Cleaning and polishing of external shell; Head reaming if necessary; Bur removal if necessary; Replacement of end gasket; Testing using OEM standards; 12 months warranty

Rotor, Back Cap, and Spray Plate Replacement EUR 260,00

Replacement of rotor, back-cap, spray plate, o-rings and seals; Concentricity check; Cleaning interior; Cleaning of air and water lines; Cleaning and polishing of external shell; Head reaming if necessary; Bur removal if necessary; Replacement of end gasket; Testing using OEM standards; 12 months warranty

Contra angles (red, blue and green) from 140,00 EUR and up

Contra angle repairs may include, depending on the damage:

Replacement of headgear, bearings,intermediate shaft, idler shaft, o-rings, gears; Cleaning interior; Cleaning of air and water lines; Cleaning and polishing of external shell; Testing using OEM standards; 3 to 6 months warranty except if your instrument has been subjected to apparent misuse, abuse or accident.

Micro motors from 170,00 and up

Micro motors repairs may include, depending on the damage:

Replacement of bearings, brushes, rotor, magnets; Stator cleaning; Testing; 3 to 6 months warranty except if your instrument has been subjected to apparent misuse, abuse or accident.

Other Instruments, price varies

We can fix other instruments too. Price and warranty vary on the model, parts needed and condition of an instrument.

CONTACT

Phone: +386 1 361 61 57

E-mail: info@vkl-dentalturbines.biz


CONTACT USA

Phone: + 1 (929) 389-7023

E-mail: tanja@vkl.biz

INFO

V&KL dental rotor d.o.o.
Šmartinska cesta 152
SI-1000 Ljubljana
Slovenia

The V&KL denatl rotor company or its products are in no way connected with the Bien Air, Castellini,
Kavo, NSK, Siemens, Sirona, W&H, Midwest,BA International, Morita
and Star companies mentioned on this website.

web design: